Hello again Daggs,
Great minds think alike!
That's strange, about how all the different software deals with the same .stl, but nothing suprising. I think with open source software, esp two different brands doing the same thing, will do things differently
as there isn't really a set standard to do things out there in my opinion. We've both experenced that!
I had the same experence with slic3r as you with the 3 bushings; they were all dead flat on the base frame, and you can easily select one, delete the rest, rotate, multiply, etc.
My preference software for editing Reprap .stls is Tinkercad, I find it easy to cut holes with that software if you need to modify the .stl.
I don't particulary like 123D.
Worth a try, alternatively I can do it for you.
Great minds think alike!
That's strange, about how all the different software deals with the same .stl, but nothing suprising. I think with open source software, esp two different brands doing the same thing, will do things differently
as there isn't really a set standard to do things out there in my opinion. We've both experenced that!
I had the same experence with slic3r as you with the 3 bushings; they were all dead flat on the base frame, and you can easily select one, delete the rest, rotate, multiply, etc.
My preference software for editing Reprap .stls is Tinkercad, I find it easy to cut holes with that software if you need to modify the .stl.
I don't particulary like 123D.
Worth a try, alternatively I can do it for you.